Toyota Hzj 75
Technical specifications
- Vehicle Categories: Off-road Vehicles (4x4 / Pick-up / Vans)
- Brand: Toyota
- Model / Type: Hzj75
- Year of manufacture: 1999
- Mileage: 316000
- Power (hp): 130
- Drive type: All-wheel drive (4x4 / AWD)
- Transmission type: Manual transmission
- Location: Schweiz 3714 Frutigen
Description
For Sale: Toyota Land Cruiser HZJ75 4x4 with pop-up roof
Engine: 1HZ / kW: 95 / PS: 130 / Displacement: 4.2 liters
For sale after vehicle inspection (Sep. 2026) / Mileage: 316,000
Price: CHF 39,000 (negotiable)
Features
* Vitfrigo 42-liter compressor refrigerator
* Sink with retractable shower head for outdoor shower
* 6-liter electric hot water boiler
* Fresh water tank: 90 liters
* Water canister at the rear: 10 liters
* Water filtration system with pressure pump
* Autoterm Air2D diesel auxiliary heater (Planar)
* Alucab Hercules pop-up roof
* Solar panels: 2 x 100 watts
* Additional rear lights
* Low-range gear
* TJM rear differential lock
* TJM air compressor
* Tourfactory side exhaust
* 100Ah lithium battery, charged by an additional 12V alternator or solar panel
* 80-liter auxiliary diesel tank
* Reinforced TJM suspension
* Jack / 2x sand plates
* 2 sets of wheels
No cruise control / no air conditioning / no front-axle lock
Defects
* Seat covers have tears
* 1 speaker is defective
* Faucet is worn out
* Headliner is discolored / yellowed
* Snorkel was installed by the previous owner without valid paperwork = must be removed for the MFK
* The dashboard should be repainted
The following work was performed at 260,000 km:
* Major rust treatment
* Complete exterior repaint by a body shop
* Installed a 12V alternator
* Bearings and brushes replaced on the 24V alternator
* Fuel injectors inspected
* Timing belt and camshaft oil seal replaced
* Starter contacts replaced
* Installed a feed pump with a water separator
* Power steering pump sealed
* Front axle: Sealing rings, bearing housings, wheel bearings, drive shafts
* Clutch assembly completely replaced
* Transmission and transfer case: bearings & seals
* Rear axle: Differential lock installed, wheel bearings replaced, brake cylinders replaced.
* Approx. 80% of the brake lines replaced with copper alloy.
* Preserved multiple times with Fluid Film.